This type of weighbridge is most suitable for places with limited space e.g. non-hilly areas where the construction of pit is not a costly affair. Since the platform is in level with the ground, vehicles can approach the weighbridge from any direction. Most public weighbridges prefer this design.

Benefits :

1. Lesser Space Required (As it has no ramps)
2. Rickshaws & Tractor Trolleys can also be weighed as platform is in flush with ground level.

Platform Size	Capacity*	Number of Load Cells
6 x 3 m	30t	4
7.5 x 3 m	30t/40t/50t	4
8 x 3 m	30t/40t/50t/60t	4
9 x 3 m	40t/50t/60t	4
10 x 3 m	50t/60t	4
12 x 3 m	50t/60t/80t	4
14 x 3 m	50t/60t/80t/100t	6
15 x 3 m	50t/60t/80t/100t	6
16 x 3 m	50t/60t/80t/100t	6
18 x 3 m	50t/60t/80t/100t	6
20 x 3 m	80t/100t	6

* Max axle loads as per specs of Indian Road Congress. All specifications subject to change without prior notice.

** Higher Capacities up to 200t also available.

This type of weighbridge / Truckscale is most suitable where the excavation work for foundation is difficult or construction of pit is expensive. Since the structure is above ground level, vehicles can approach the weighbridge only from two directions where the ramps are provided. This type of weighbridge requires more space.

Benefits :

1. Costly Pit construction is eliminated.
2. Platform above ground level- No water logging during rainy season.
3. Problem of pit maintenance is eliminated.
4. Easy maintenance since all parts accessible above ground level.

Size & Capacities :

Platform Size	Capacity*	Number of Load Cells
6 x 3 m	30t	4
7.5 x 3 m	30t/40t/50t	4
8 x 3 m	30t/40t/50t/60t	4
9 x 3 m	40t/50t/60t	4
10 x 3 m	50t/60t	4
12 x 3 m	50t/60t/80t	4
14 x 3 m	50t/60t/80t/100t	6
15 x 3 m	50t/60t/80t/100t	6
16 x 3 m	50t/60t/80t/100t	6
18 x 3 m	50t/60t/80t/100t	6
20 x 3 m	80t/100t	6

* Max axle loads as per specs of Indian Road Congress. All specifications subject to change without prior notice.

** Higher Capacities up to 200t also available.

Axle weigh bridges are ideal weighing system for weighing trucks in the following types of industries :

1. Ready Mix Concrete Plants
2. Asphalt Mix Plants
3. Aggregate Crusher Plants
4. Bio-mass energy Units
5. Waste management Units

Axle weigh bridges has tremendous benefits like, Low Cost, Low Foundation work, Low Transportation Cost and quick to install.

Civil foundation work can be completed in 2 to 3 days and the weigh bridge itself can be installed in just One day !!

Hundreds of such systems working around the world.

Axel Weighbridge Salient Features :

1. Very low cost
2. Low expenditure on civil foundation
3. Quick delivery
4. Installation in one day
5. IP-68 protection for load cells
6. Fully protected from lightening
7. Very powerful software (axsoft), gives total control & accountability
8. Very rugged instrumentation to give seam less performance
9. Capacities ranging from 20 ton onward
10. Manufactured in a zero-tolerence zone
11. Hundreds on installations around the world

ISO 9001 Certified

Portable Pad Weigher is ideal for weighing trucks or tractors in construction sites, mines, factories and places where there is space constraint.

Features :

1. Weighs each wheel of a truck, seperately
2. Easy to shift, as each pad weighs only 35 kgs
3. Each pad has a weighing capacity of upto 10000 kgs
4. Pad is provided with foldable ramps
5. Works on 12 volt dc power supply
6. Depending on requirement, any number of pads can be cascaded
7. Good accuracy

On Board Weighing System for Wheel Loaders / On Board Dumper Weighing System (GUARD–53) consists of a very high capacity pressure transducer fixed to the inlet port of the vehicle's lifting cylinder. The hydraulic pressure in the lifting cylinder is proportional to the load carried in the bucket.

The output of the pressure transducer is connected to our Indicator which is mounted inside the operator's cabin. This Indicator works on 24V DC. The Indicator displays the instantaneous weight of material in the bucket and also totalizes this weight reading.

This Totalised quantity is subtracted from the target load which is set by the operator. This allows the operator to control the quantity of material into the truck or wagon in the final stages of loading, thereby avoiding over-loads.

The data can be transferred from the loader weighing module, to a PC, with an ordinary pen drive.

On Board Weighing System Features :

1. Most effective on-board weighing system for wheel loaders.
2. Direct display of material loaded into trucks / wagons.
3. Saves time and fuel, on load correction re-runs by trucks.
4. Saves money on wagon over-loading, by effective load monitoring.
5. Monitors the loader operating efficiency.
6. Prevents over-loading / under-loading into trucks / wagons.
7. No compromise on loader operation or speed.
8. Easy to operate, wide screen and large display console, with touch screen.
9. Quick data transfer from loader weighing module to pc with an ordinary pen drive.
10. Data can be analysed, date wise or truck wise or material wise etc.
11. Installation in 5 hours, including calibration.